LAMBORGHINI Taura 24 MCS W TOP, Instruction Booklet

Page: 25 / 112

Diaphragms
Boiler operation requires fitting the diaphragms supplied with the unit as instructed in the following tables and
drawings.
Choosing the diaphragm using coaxial pipes Choosing the diaphragm using separate pipes
Type Length up to: Diaphragm to use
Coaxial
60/100
1 bend + 1 metre Ø84 external
1 bend + 3 metres No diaphragm
Pipe length
calculated in linear metres Diaphragm to use
Min Max
0 m 20 m Ø50 internal
20 m 35 m No diaphragm
To change the diaphragm:
Diaphragm for coaxial pipes
Insert the diaphragm on the aluminium section
Ø60 of the upper flange of the boiler
Diaphragm for separate pipes
Insert the diaphragm under the flanged
air inlet section Ø80
Ø 84
Connection with coaxial pipes
Fit the concentric pipe, positioning it in the required direction, and insert the seal onto it and install the diaphragm
(when necessary). Fit the fume outlet and suction pipes observing the distances given on the respective installation
diagram. It is necessary to keep the fume outlet sloping slightly outwards.
CONCENTRIC OUTLET max length 3 m + bend
100 Max. 3000
220
Ø100
105
400
720
100 Max. 3000
229
320
Air
diaphragm
OUTLET
Taura 24 MCS W TOP
25
Ø 50