LAMBORGHINI R3 EVO 85, Workshop Manual

Page: 7 / 61

VII
ConTEnTs
30.3.58 - Removal and refitting of the oil pressure switch 30-216
30.3.59 - Removal and refitting of the water pump 30-218
30.3.60 - Testing the thermostat (after removal) 30-220
30.3.61 - Removal and refitting of the thermostat 30-222
30.3.62 - Removal and assembly of the fan support 30-224
30.3.63 - Removal and refitting of the fan support 30-230
30.3.64 - Removal and refitting of the flywheel 30-232
30.3.65 - Replacing the starter motor ring gear on the flywheel 30-234
30.4 - C0 - Engine accessories 30-236
30.4.1 - Starter motor 30-236
30.4.2 - Removing and fitting the engine governor 30-237
30.4.3 - Removal and refitting of the exhaust manifold 30-239
30.4.4 - Removal and refitting of the fuel filter head. 30-242
30.4.5 - Assembly and disassembly of the temperature sender 30-244
30.4.6 - Removal and refitting the engine block 30-246
30.4.7 - Removal and refitting of the alternator (with drivebelt) 30-247
30.4.8 - Disassembly and assembly of the starter 30-251
30.5 - D0 - Transmission 30-253
30.5.1 - Changing the transmission oil (D0.00.01) (R3 EVO 110 -> 1001) 30-253
30.5.2 - Range selector assembly (R3 EVO 110 -> 1001) 30-254
30.5.3 - Disassembly of the range selector (R3 EVO 110 -> 1001) 30-255
30.5.4 - Separation of housing from transmission (D0.02.01) (R3 EVO 110 -> 1001) 30-257
30.5.5 - Shuttle assembly - complete unit (D0.03.01) (R3 EVO 110 -> 1001) 30-261
30.5.6 - Disassembly of the shuttle unit (R3 EVO 110 -> 1001) 30-263
30.5.7 - Disassembly of the cover unit (R3 EVO 110 -> 1001) 30-266
30.5.8 - Disassembly of the forward drive clutch assembly (R3 EVO 110 -> 1001) 30-268
30.5.9 - Disassembly of the reverse drive clutch assembly (R3 EVO 110 -> 1001) 30-272
30.5.10 - Gearbox and Hi-Lo assembly (R3 EVO 110 -> 1001) 30-277
30.5.11 - Disassembly of the Hi-Lo unit (D0.04.01) (R3 EVO 110 -> 1001) 30-278
30.5.12 - Disassembly of the planet carrier (R3 EVO 110 -> 1001) 30-284
30.5.13 - Disassembly of the Hi range clutch housing (R3 EVO 110 -> 1001) 30-286
30.5.14 - Hi-Lo unit output shaft disassembly procedure (R3 EVO 110 -> 1001) 30-295
30.5.15 - Disassembly of the gearbox input shaft (R3 EVO 110 -> 1001) 30-296
30.5.16 - Torsional spring plate (R3 EVO 110 -> 1001) 30-299
30.5.17 - Disassembly of the primary shaft - Version with Hi-Lo (R3 EVO 110 -> 1001) 30-300
30.5.18 - Secondary shaft - Version with Hi-Lo (R3 EVO 110 -> 1001) 30-301
30.5.19 - Disassembly of the secondary shaft - Version with Hi-Lo (R3 EVO 110 -> 1001) 30-305
30.5.20 - Range gearbox and differential assembly - complete assembly (R3 EVO 110 -> 1001) 30-308
30.5.21 - Complete gearbox assembly - Version with Hi-Lo (D0.09.04) (R3 EVO 110 -> 1001) 30-308
30.5.22 - Adjustment of the differential - Bevel gear pair (R3 EVO 110 -> 1001) 30-310
30.5.23 - Disassembly of the rear pinion (D0.11.01) (R3 EVO 110 -> 1001) 30-317
30.5.24 - Disassembly of the 4WD output shaft (R3 EVO 110 -> 1001) 30-322
30.5.25 - PTO clutch. (D0.12.02) (R3 EVO 110 -> 1001) 30-324
30.5.26 - Disassembly of the PTO clutch (R3 EVO 110 -> 1001) 30-328
30.5.27 - Pump drive PTO - Outer gear (R3 EVO 110 -> 1001) 30-332
30.5.28 - Pump drive PTO - Inner gear (R3 EVO 110 -> 1001) 30-334
30.5.29 - PTO output shaft - 4 speed version (D0.14.01) (R3 EVO 110 -> 1001) 30-336
30.5.30 - Disassembly of the PTO output shaft - 4 speed version (R3 EVO 110 -> 1001) 30-340
Find manuals at https://best-manuals.com