background image

B

The CE marking certifies that the products meet the essential requirements of the rele-
vant directives in force.
The declaration of conformity may be requested from the manufacturer.

COUNTRIES OF DESTINATION: IT - ES - RO - BG - HR - GR - HU - RS

This symbol indicates 

“CAUTION”

 and is placed next to all safety warnings. Strictly follow these instructions in order to avoid 

danger and damage to persons, animals and things

This symbols calls attention to a note or important notice.

This symbol, which is used on the product, packaging or documents, means that at the end of its useful life, this product must 
not be collected, recycled or disposed of together with domestic waste.
Improper management of electric or electronic waste can lead to the leakage of hazardous substances contained in the pro-
duct. For the purpose of preventing damage to health or the environment, users are kindly asked to separate this equipment 
from other types of waste and to ask for it to be dealt with by the municipal waste service or dealer under the conditions and 
according to the methods set down in national and international laws transposing the Directive 2012/19/EU.
Separate waste collection and recycling of unused equipment helps to save natural resources and to guarantee that this waste 
is processed in a manner that is safe for health and the environment.
For more information about how to collect electric and electronic equipment and appliances, please contact your local Council 
or Public Authority competent to issue the relevant permits.

EECO P N

27

EN

cod. 3541S060  -  Rev. 00  -  05/2019

• Read the warnings in this instruction book-

let carefully since they provide important in-
formation on safe installation, use and
maintenance.

• This instruction booklet is an integral part of

the product and must be kept with care by
the user for future reference.

• If the unit is sold or transferred to another

owner or if it is to be moved, always make
sure the booklet accompanies the boiler so
that it can be consulted by the new owner
and/or installer.

• Installation and maintenance must be car-

ried out by professionally qualified person-
nel, according to the current regulations
and the manufacturer's instructions.

• Incorrect installation or inadequate mainte-

nance can result in damage or injury. The
manufacturer declines any responsibility
for damage caused by errors in installation
and use or by failure to follow the manufac-
turer's instructions.

• Before carrying out any cleaning or mainte-

nance operation, disconnect the unit from
the electrical power supply using the switch
and/or the special cut-off devices.

• In case of a fault and/or poor operation, de-

activate the unit and do not try to repair it or
directly intervene. Contact professionally
qualified personnel. Any repair/replace-
ment of products must only be carried out
by qualified personnel using original re-

placement parts. Failure to comply with the
above could affect the safety of the unit.

• Periodical maintenance carried out by

qualified personnel is essential to ensure
proper operation of the unit.

• This unit must only be used for the purpose

for which it was designed. Any other use is
considered improper and therefore hazard-
ous.

• After removing the packing, check the in-

tegrity of the contents. The packing materi-
als are potentially hazardous and must not
be left within the reach of children.

• The unit must not be used by people (in-

cluding children) with limited physical, sen-
sory or mental abilities or without
experience and knowledge of it, unless in-
structed or supervised in its use by some-
one responsible for their safety.

• In case of doubt do not use the unit. Con-

tact the supplier.

• The unit and its accessories must be dis-

posed of appropriately, in conformity with
the current regulations.

• The images given in this manual are a sim-

plified representation of the product. In this
representation there may be slight and in-
significant differences with respect to the
product supplied.

Summary of Contents for ECO P N Series


























Reviews: