Lamborghini Caloreclima ECO 50/2, Installation And Maintenance Manual

Page: 36 / 112

- 36
-
MAINTENANCE
All operations should be performed with the
electrical supply disconnected. After removing
the casing, it is possible to clean the photo
resistance, inspect the motor, the electroma-
gnetic valve, the transformer and the air intake
control. To reach the fan and butterfly valve, the
over-head plate and component mount must be
removed. This will be attached in the standard
service position. This operation will also make
the combustion head easy to remove. To clean
and inspect the choke-electrodes, normally, one
should extract the head group by moving the
over-head plate.
PHOTO RESISTANCE
Unscrew from position and clean the photosensitive window with a dry cloth.
PUMP FILTER
Close the fuel line valve, take off the pump cover, take out the filter, clean it with gasoline, rinse it with light oil and re-
assemble carefully.
FUEL LINE FILTER
Close the fuel line valve, take off the filter cover, unscrew the filter, and clean the filter carefully. Re-assemble carefully.
FAN POSITION
0÷0,5