Lamborghini Caloreclima ALHENA TECH H, Instructions For Use, Installation And Maintenance

Page: 303 / 344

303
EN
cod. 3541V620 - Rev. 00 - 05/2021
ALHENA TECH H
Display adjustment menu [Display]
In this menu it is possible to set some dis-
play parameters.
[Contrast]
Contrast adjustment.
[Brightness]
Brightness adjustment
[Backlight time]
Display backlight duration.
[Reset]
Restore factory values.
fig. 22
Sliding Temperature
When the external probe (optional) is installed, the boiler adjustment system works with "Sliding
Temperature". In this mode, the heating system temperature is regulated according to weather
conditions, to ensure high comfort and energy efficiency throughout the year. In particular, as the
outside temperature increases the system flow temperature decreases according to a specific
"compensation curve".
With
"Sliding Temperature"
, the temperature set using the heating buttons (details 3 and 4 -
fig. 1) becomes the maximum system flow temperature. It is advisable to set a maximum value to
allow system adjustment throughout its useful operating range.
The boiler must be adjusted at the time of installation by qualified personnel. However, the user
can make any further adjustments necessary to optimize comfort levels.
Compensation curve and curve offset
From the main screen, press the button to access the
navigation menu [MENU]
. Using the
buttons and
heating
select the
installer menu [SERVICE]
and confirm with the button .
Enter the password (see *** 'Installer menu [SERVICE]' on page 299 ***) and press the button .
Using the buttons and
heating
select the menu
Climatic curves setting [OTC]
and con-
firm by pressing the button .
DISPLAY
Contrast
Brightness
Backlight time
Reset
4
Max
1m