P
a
g
e
8
Operating mode Symbol Meaning
Vacation
The heating operation and the hot water support are switched off or the heating
runs at night level, depending on the last active automatic operating mode
(day/OFF or day/night). When adjusting this operating mode, you are asked to
enter a start date and an end date.
Manual operation
Operating mode for commissioning or repair work. Please do not adjust any
settings in this operating mode! It is only important for your heating specialist
(burner step 1 and heating system pumps are switched on).
Emission control
Operating mode for the chimney sweep. Burner and heating system pump are
switched on for max. 30 minutes or until the max. boiler temperature has been
reached. Switch on emission control for burner step 2 (key ), switch off
(key ). Please do not adjust any settings in this operating mode!
10.
Manual change temperature level heating
With this function you can manually change the temperature level in the automatic operating modes until the
next switching time.
e.g.
You can manually change the temperature level of your heating (e.g. when you are not at home on a
Sunday). In this case your heating will run according to the (lower) setpoint values night.
If you come home earlier from work, you can directly switch to the setpoint values day and do not have
to wait for the next switching time. When the next switching time starts, the manual adjustment is
reset.
Move with the key to the submenu and switch with or to the desired day-, night- or
economy level of the heating. Acknowledge your choice with the key .
Adjustment temperature
level
Symbol
Meaning
Manual choice of the
automatic temperature
regulation
To cancel manual changes, switch to the automatic mode in the
submenu (display ”Auto“).
Manual change to tem-
perature regulation: day
In this mode you leave the automatic temperature regulation of the
heating according to the given adjustments. The controller runs
with the setpoint values day until the next switching time, that is
stored in the controller. The cursor below the symbol flashes on.
Manual change to tem-
perature regulation: econ-
omy level
In this mode you leave the automatic temperature regulation of the
heating according to the given adjustments. The controller runs
with the setpoint values economy level until the next switching time
that is stored in the controller.
Manual change to tem-
perature regulation: night
In this mode you leave the automatic temperature regulation of the
heating according to the given adjustments. The controller runs
with the setpoint values night until the next switching time that is
stored in the controller.
esc
+
OK
--
Submenu operating modes
+
--
