lamber M115, Instruction Manual

Page: 33 / 42

33
TORQUE LIMITER
The limiter has already been described at
paragraph “SAFETY DEVICES”.
It is located in connection with the drawbar
and it is calibrated during testing by the
manufacturer.
In case it is necessary to calibrate it again,
proceed as follows:
1. Switch the machine off ;
2. Remove the protection panel;
3. Load the machine with baskets full of
dishes to be washed;
4. Loose the axial ring nut with the
hexagon ring wrench type “A”;
5. Disengage the friction with a hooked
key type “B” so that it slips;
6. At this point clockwise turn until the
drawbar manages to carry the whole
dishes charge;
7. The device is considered adequately
calibrated when the drawbar hardly
manages to carry the whole charge in
second gear.