lamber M115 Instruction Manual Download Page 22

 

22 

This way all washing operations are 
stopped preventing dangerous jets of hot 
water from spurting out. 
Operation is restored only when the door 
are closed again and the start button “H” 
pressed. 
 
 

EMERGENCY STOP PUSHBUTTON 

 
The machine is equipped with a red 
mushroom-shaped pushbutton on yellow 
field, which, if pressed, stops all motors. 
Once the trouble has been removed, it is 
possible to restart the machine only after 
the pushbutton has been rotated and 
released. Subsequently press the start 
button “H” again. 

 
 

TORQUE LIMITER 

 
The drawbar forward feeding system is 
provided with a mechanical friction torque 
limiter located in the drawbar system. 
Each time something interposes between 
the basket and the machine or the central 
drawbar is overloaded, the bar motion 
lowers rapidly to zero. 
In this case it is necessary to switch the 
machine off by means of stop or 
emergency pushbuttons, remove the 
obstacle and press the start button again. 
To calibrate this kind of device, see the 
relevant chapter included in the second 
part of the manual dedicated to the 
installer. 

 

MOTOR PROTECTION DEVICES 

 
Each motor is protected against short-
circuits and current overload by automatic 
magneto-thermal relays. 
Lamp "M" switching on signalizes the 
intervention of any of these relays

In this case, the machine should be 
switched off and qualified personnel should 
be asked for repair. 

 
 

ELEMENTS PROTECTION 

 
Each element is protected against short 
circuit by automatic breakers. 
Tank elements are protected against dry 
running by minimum level pressure switch. 
Boiler and dryer elements by thermostats 
with manual reset. 
In case of troubles, ask for the intervention 
of qualified and authorized personnel (see 
the paragraph dedicated to the user). 
 
 

RESIDUAL RISKS 

 
Although the appliance is equipped with the 
above-mentioned safety devices, danger of 
burns to upper limbs persists. 
 
As already mentioned in the paragraph 
“DURING WASHING OPERATIONS”, 
avoid dipping your naked hands into soapy 
hot water of the tanks. This can cause 
burns and skin irritations. 
In this case, immediately rinse them with 
plenty of water.Anyway consult the product 
card of the detergent employed. 

 
 
 

Summary of Contents for M115











































Reviews: