83-507-013 Rev. A
32
-Extraction tool: AMP, 91232-1 or equivalent.
-Manual Pistol grip tool:
Handle:AMP, P/N:58074-1
Head:AMP, P/N:58063-2
Before making any connection, turn the AC on/Off switch to the Off position and wait until the front panel
display has turned Off.
CAUTION
Terminals 12, 22 and 23 of J1 are connected internally to the
negative sense (-S) potential of the power supply. Do not
attempt to bias any of these terminals relative to the nega-
tive sense. Use the Isolated Programming interface option to
allow control from a programming source at a different po-
tential relative to the power supply negative.
CAUTION
To prevent ground loops and to maintain power supply isola-
tion when programming from J1, use an ungrounded pro-
gramming source.
WARNING
There is a potential shock hazard at the output when using a
power supply with rated output greater than 40V. Use wires
with minimum insulation rating equivalent to the maximum
output voltage of the power supply.
