7
EN
CZ
CZ
CZ
CZ
CZ
CZ
CZ
–
Connect the power cord to the charger and then plug the charger into an electrical socket,
making sure that the light on the charger is
GREEN
.
–
Insert the end of the charger into the power input on the scooter. The charger light should
turn
RED
when charging. When the light turns
GREEN
, the scooter is fully charged. It takes
approximately
5–6 hours
to fully charge.
–
After charging the scooter, disconnect the charger from the power socket and the power cable
from the scooter.
–
Do not leave the scooter connected to the charger longer than necessary to fully charge.
Never
leave the scooter connected to the charger unattended.
9. BATTERY SAFETY PRECAUTIONS
–
Fully charge the battery before using it for the first time.
–
Charge regularly, after every ride.
–
Never let the battery drain completely!
–
Use standard charging cables, otherwise the device may be damaged.
–
Operating temperature can affect the overall battery life.
–
Under no circumstances should you connect damaged or swollen batteries to the charger. Never
use batteries in this condition, there is a risk of explosion.
–
Do not use a damaged power adapter or charger.
–
Charge at room temperature, never charge at below 0°C or above 40°C.
–
Be careful not to drop, puncture, or otherwise damage the battery. Never attempt to repair a
damaged battery.
–
Do not expose the charger or battery to moisture, water, rain, snow or any kind of spray.
–
Do not leave the battery in a vehicle, do not expose to sunlight or place near heat sources.
Powerful light or high temperatures can damage the battery.
–
Never leave the batteries unattended while charging. A short circuit or accidental overcharging
can cause the aggressive chemicals to leak, explode or subsequent fire!
–
If the battery overheats while charging, unplug the battery immediately.
–
Do not place the charger or battery on or near flammable objects when charging. Keep away
from curtains, carpets, tablecloths, etc.
–
Keep the battery out of reach of children and animals.
–
Never disassemble the charger or battery.
–
If the battery is integrated, never disassemble the device unless otherwise specified. Any such
attempt is a risk and may result in damage to the product and subsequent loss of warranty.
–
Do not dispose of worn or damaged batteries in a waste bin, fire or heating system. Hand them
in at hazardous waste collection plants.
–
If you do not comply with this policy, you assume full responsibility for any damages incurred.
10. SERVICING, MAINTENANCE AND STORAGE
The scooter needs regular inspection and maintenance just like a bicycle or motorcycle. Always
make sure that the scooter is switched off and the power cord is disconnected before performing the
following operations.
Scooter inspection and cleaning
–
Regularly check the frame and tyres for damage or excessive wear. If a tyre is excessively worn, it
should be changed. Do not use water or other liquids or detergents for cleaning. Dampen a clean
cloth with clean soapy water and apply to the scooter frame, then rinse the cloth thoroughly and
wipe the scooter down. When cleaning, make sure water does not get into the battery cover,
power input, display, or tyres.
