9
INSTRUCTIONS FOR USE
Make sure both grill plates are fixed securely on the grill before switching on, otherwise
the grill will not preheat properly. Never plug in and switch on the grill without the grill
plates.
Place the Digital Grill near a socket on a flat heat resistant surface or heatproof board
to catch any juices that may escape during cooking. The grill should only be used in a
well-ventilated area, at least 30cm away from walls and other surfaces to allow sufficient
airflow.
Plug into the socket and switch on.
ON/OFF POWER BUTTON
• There is an On/Off Power button located at the back of the appliance. When switched
on the appliance will beep and the control panel will illuminate.
MENU DISPLAY
• Time and temperature display will illuminate red. These can be adjusted using the
and
buttons by each one, the initial setting will show – time: 5:00 (5 minutes);
temperature: 200°C. This is a preheat program.
• The time range of the Digital Grill is from 0:10 to 9:50 and will increase and decrease
in 10 second increments.
• The temperature range of the Digital Grill is from 60 to 220°C and will increase and
decrease in 10°C increments.
Time increase
button
Temperature
increase button
Temperature
decrease button
Start/pause
button
Cooking time
display
Temperature
display
Time decrease
button
PREHEATING
• In the preheating process the time
and
buttons are in a locked status and do
not function.
• Adjust the temperature
and
buttons to the temperature you require.
• When the temperature is set, press the Start/Pause button on the right to start
heating up. Whilst the appliance is preheating, both sets of
and
buttons do
not function, the temperature display will flash red, until the required temperature is
reached.
• The time display will illuminate red but does not flash.