Lakeland 63480, Instruction Booklet, Page: 9 / 20

9
7. When the appliance stops pumping water automatically, discard the water in your
espresso cup and clean them thoroughly. The water is not suitable for drinking and
should be thrown away.
8. Repeat this, three times.
9. When you switch on the appliance for the first time there may be a slight burning
smell. This is normal for a new product and will disappear after a few uses. Now you
can start brewing.
Note: There may be noise when pumping the water on the first time, it is normal, the
appliance is releasing the air in the appliance. After about 20s, the noise will disappear.
ADDING AND REMOVAL OF FILTER FROM PORTAFILTER
SINGLE AND DOUBLE ESPRESSO FILTERS
To add or remove the filter from the portafilter, line up the
raise dot on the side of the filter with the gap on the side of
the portafilter.
EMPTYING THE DRIP TRAY
1. Empty the drip tray on a regular basis, by holding on each side from the front and
drawing the drip tray towards you.
2. Remove the drip plate and discard of the contents in the sink, wash in clean soapy
water and dry thoroughly.
3. When the drip tray full indicator, the red float in the drip tray is raised above the drip
plate, the drip tray requires emptying.