Lakeland 62802, Instruction Booklet, Page: 9 / 24

9
INSTRUCTIONS FOR USE
• PLEASE NOTE : This is an oil free fryer that works on hot
air DO NOT fill the pan with oil or any other liquid. Do
not exceed the ‘MAX’ mark when putting your
ingredients into the basket.
• Place the Air Fryer on a flat heat resistant surface near a socket.
The Air Fryer must
be used in a well ventilated area, at least 30cm away from walls and other
surfaces to allow sufficient airflow.
• When using the Air Fryer for the first time you may notice a slight burning smell. This is
normal for a new heating element and will disappear after a few uses.
• Plug in and switch on the Air Fryer at the socket, the appliance will beep, the display
will briefly illuminate and the power light will illuminate blue
. The power light will
show that the Air Fryer has power, but this does NOT indicate that it is turned on.
• Press and hold the START/PAUSE button, there will be a beep.
MANUAL FUNCTION
• The Manual Function will illuminate on the digital display, the default temperature of
180°C and the default time of 15:00 minutes.
The Air Fryer changes between temperature and time on the display every 3 seconds.
• Press the Temperature Icon on the display. Then, turn the START/PAUSE button to adjust
the temperature, this will increase or decrease the temperature in 5°C increments from
80-200°C.
• Press the Timer Icon on the display. Then, turn the START/PAUSE button to adjust the
time, this will increase or decrease in 1 minute increments up to 30:00 minutes.
• Press the START/PAUSE button again to begin air frying.
PRESET FUNCTION
• Turn the Air Fryer on by pressing the START/PAUSE button.
• Press the Function Selection Icon on the Digital Display repeatedly until the desired
function icon illuminates.
• Press the START/PAUSE button again to begin air frying.