9
FILLING THE WATER TANK
• For best results, always make sure there is plenty of
water in the tank when ironing, but do not fill the tank
beyond the ‘MAX’ level.
• Only use water in the water tank.
DO NOT
add perfume,
vinegar, chemically descaled water or any other
substances into the water tank.
• Always make sure the iron is switched off and
unplugged from the socket.
• Holding the water tank handle, lift the water tank lock
upwards to pull out the water tank, removing from the
base unit.
• Fill water tank with tap water through the filling
aperture, until the ‘MAX’ mark is reached.
• Never fill the water tank level beyond the ‘MAX’ mark.
• After filling replace the water tank into the base unit.
WATER REFILL INDICATOR
• If the water in the water tank is lower than the ‘MIN’ level mark, the water refill
indicator will illuminate red and there will be two audible beeps.
• The appliance will stop working, you need to add water into the tank.
• Remove the water tank and refill it with water through the filling aperture, make sure
that the water level is between the ‘MIN’ and ‘MAX’ level mark.
• Replace the water tank into the base unit, the water refill indicator will turn off and the
appliance will continue to work normally.
CORRECT PLACEMENT OF STEAM GENERATOR IRON ON THE BASE UNIT
When the iron is put on the thermal insulation stand, it must be placed on it correctly.
Incorrect position
Correct position