Lakeland 27537, Instruction Booklet

Page: 10 / 24

10
POWER ON MODE
• Plug in and switch on the Slimline Air Fryer at the socket, the appliance will beep.
• Press the ON/OFF power icon once, it will illuminate the full control panel, the default
setting of Fries will flash, with the temperature and time alternating on the control
panel of 200°C and 20 minutes. The rest of the pre-set cooking functions will be
illuminated.
• If no icons on the control panel are touched after 5 minutes, the appliance go into
standby mode.
• Press and hold the On/OFF power icon at any time during the cooking process will
shut off the appliance and it will enter standby mode. Nothing will be illuminated on
the control panel except the on/off power icon. The fan will continue running for
20 seconds to cool down the appliance.
NOTE: Preheat the Slimline Air Fryer with NO food in the crisper drawer for 3 minutes at
the required temperature to warm up.
STANDBY MODE
• When only the ON/OFF power icon is illuminated on the control panel the appliance
is in standby mode.
• Press the On/OFF power icon to activate the appliance, there will be a beep.
• If no icons on the control panel are touched after 5 minutes, it will go back to standby
mode. Likewise, if you have paused or opened the crisper drawer and there is no
operation within 5 minutes, it will go back to standby mode.
SELECTING THE PRE-SET COOKING FUNCTION
• Press the pre-set cooking function icon and the appliance will skip through the pre-
set cooking functions to your desired setting. The selected pre-set cooking function
will flash.
• When you have selected the pre-set cooking function on the LED digital display the
default temperature and time for that setting will flash and alternate between the
two.
INCREASING OR DECREASING TEMPERATURE
• You can adjust the temperature at any stage, either when you have selected the
desired pre-set cooking function or during operation.
• To adjust the temperature, press either the ‘+’ or ‘-’ temperature icons, the
temperature will adjust by 5°C increments.
• When the maximum or minimum value in the range is reached, the appliance will
beep twice, you will have to press either the ‘+’ or ‘-’ temperature icons to alter the
temperature, unless the highest or lowest temperature is required.