17.
The vacuum cleaner is not intended for use by children or infirm people unless they have been adequately
supervised by a responsible person to ensure they can use it safely.
18.
Do not use the vacuum cleaner if the power cord or plug show any signs of damage, or if the appliance
has been dropped, damaged, left outdoors, allowed to get wet, or is working incorrectly. Call the helpline
on 015394 88100 to arrange a replacement. Never try to repair it yourself as this may cause electric
shock.
BEFORE USING FOR THE FIRST TIME
Unpack the turbo vac carefully. Remove any packaging and check that you have all the correct parts.
Make sure the turbo vac is switched off – with the on/off button pressed to ‘O’ — and unplugged. Press the dust
collector release button. Lift off the dust collector and check the filters are installed. Click the dust collector back
into place.
Check the flexible hose is properly connected to the turbo vac. The hose has a small brush tool on the end; this
should be firmly pushed onto the hose connector on the side of the turbo vac.
USING YOUR TURBO VAC
This hand-held turbo vac is much smaller and lighter than traditional vacuum cleaners. It reduces your effort when
cleaning all around the home, yet delivers impressive suction.
1.
Before vacuuming, make sure the turbo vac is switched off – with the on/off button pressed to ‘O’ – and
unplugged.
2.
Select a cleaning accessory. To suit the task in hand, these can be attached in three different ways:
• to the turbo vac body
• to the flexible hose
• to the extension kit.
Please see ATTACHING THE ACCESSORIES.
3.
Plug into the mains socket. Holding the turbo vac firmly by its handle, press the on/off switch to ‘I’ to start
vacuuming.
CAUTION: the turbo vac is very powerful. To prevent injury, please grip the handle tightly and do not let go
during use.
4.
To stop vacuuming, press the on/off switch to ‘O’. Unplug from the socket.
ATTACHING THE ACCESSORIES
The turbo vac is designed to be versatile. All the accessories (except the small brush tool) can be attached in
three different ways, to suit a variety of cleaning tasks around the home.
PLEASE NOTE: the small brush tool is permanently attached to the flexible hose. It cannot be used with the
extension kit.
1.
Attaching to the turbo vac body
This lets you keep one hand free whilst vacuuming. Insert your chosen accessory straight into the suction
opening on the front of the turbo vac.
2.
Attaching to the flexible hose
This gives more freedom of movement, and is helpful on staircases or upholstery. Firstly, free the hose by
pulling the small brush tool off the hose connector on the side of the turbo vac. Then attach your chosen
accessory to the hose by inserting it into the round brush tool.
