8
INSTRUCTIONS FOR USE
• Plug in the coffee maker and switch it on at the socket, the
display will illuminate and the clock will read
0.00
.
• Press the ‘
HOUR
’ and ‘
MINUTE
’ buttons to set the time.
USING THE CARAFE
1. Ensure the switch is flipped to the right, to ‘
Carafe
’.
2. Fill the carafe with cold tap water, to the amount you require
using the cup measurements on the side.
3. Lift the carafe water tank lid and pour in the water. Do not fill
past the 12 cup mark on the tank viewing window, or the
MAX
FILL
guide inside the tank.
4. Place the empty carafe onto the hot plate.
5. Lift the carafe filter lid and remove the carafe filter basket and
permanent filter.
6. For each cup of coffee, put 1 level tablespoon (15ml) of ground
coffee into the filter.
7. Place the permanent filter into the filter basket and place them
inside the coffee maker. Ensure the notch on the side of the filter
basket is slotted into the groove inside the coffee maker.
BREW BUTTON
1. For fuller, stronger flavoured coffee press the ‘
Brew
’ button, ‘
Strong
’ will be displayed
on the screen. This setting brews your coffee slower, and will take longer. Press the
‘
Brew
’ button again to deselect and brew on the normal setting.
USING THE SWITCH FILTER COFFEE MAKER FOR
THE FIRST TIME
• The Switch Filter Coffee Maker allows you to make one carafe of coffee, or a single cup
of coffee using the travel cup included or your own cup. It will only brew either a carafe
or a cup at one time.
• Unpack the coffee maker. Remove all the packaging materials.
• Wash the carafe, travel cup and lid, coffee bag basket, filter baskets and permanent
filters in warm soapy water, dry thoroughly.
• Before first use, fill the carafe water tank with water to the ‘
12 cup
’ level, and run this
through the coffee maker following the directions below to thoroughly clean.
• Flip the switch to ‘
SINGLE CUP
’ and repeat, filling the cup water tank with a travel
cup full of water. Run this through the coffee maker following the directions below to
thoroughly clean.
