6
7
• Always ensure that your hands are dry before removing the plug from the mains socket. Never
pull the plug out of the mains socket by its lead.
• To avoid injury or possible fire, do not cover the appliance when in use.
• Do not connect this appliance to an external timer or remote control system.
• This appliance complies with the basic requirements of Directives 04/108/EC (Electromagnetic
Compatibility) and 06/95/EC (Safety of Domestic Electrical Appliances)
• WARNING: a cut off plug inserted into a 13amp socket is a serious safety (shock) hazard.
Ensure the cut off plug is disposed of safely.
• CAUTION; the plastic bags used to wrap this appliance or the packaging may be dangerous. To
avoid risk of suffocation, keep these bags out of reach of babies and children. These bags are
not toys.
• Do not touch any moving parts whilst in use. Allow the blender to stop completely before
taking it apart.
• Never use this appliance to mix or stir anything other than foods.
• Do not use whilst cooking or with boiling liquids.
• The blades are very sharp
• Only use the original battery charger provided by Lakeland in order to avoid a hazard.
• Switch off the appliance before changing accessories or touching parts that move in use
HOW TO ASSEMBLE THE CORDLESS HAND BLENDER AND USING IT FOR THE FIRST
TIME
• Before first use, the blender will need to charge for approximately 8-10 hours
• Thoroughly clean the parts which will be in contact with food before using the blender for the
first time.
• Charge the blender until the all three battery indicators light up (approximately 2 hours) when
the appliance has not been used for a short period.
• Plug the power supply into the charging stand and connect to mains power supply. Then place
the main unit into the stand. Ensure the battery indicator lights up and flashes to indicate
charging status.
• Assemble the blender by unlocking the blender wand from the charging stand by turning
clockwise
• Place the blender wand onto the main unit and turn clockwise to the locked position until it is
firmly secured
INSTRUCTIONS FOR USE
• Place the food into the measuring/mixing jug.
• Lower the blender wand into the mixing jug, the blade shield should be immersed into the
food.
• Slide the control switch downward and then press it to turn on the blender. Gently move the
blender upward, downward and in a circular movement to get best result.
• To prevent food from splashing, do not turn on the blender until the blender shield is fully
immersed in the food, and stop blending before you lift it back out of food.
• Always allow boiling foods or liquids to cool down before starting to blend. The mixing jug is
heat resistant up to 80-90ºC℃.