TROUBLESHOOTING YOUR LakeAir ELECTRONIC AIR CLEANER
6
Some of the common causes for malfunction of your air cleaner are listed below. Re-view them should you have a
problem, and perform the corrective measures listed here. If your LakeAir Electronic Air Cleaner is not restored to
proper operation, contact your Dealer, nearest Authorized Service Center, or LakeAir.
Problem
Possible Cause
Possible Remedy
Air cleaner will not operate
Control switch is in
Off
Position
Depress power switch to
High
or
Low
Power cord not plugged in
Plug in power cord
Replace fuse or
reset breaker
Blown fuse in household or
breaker tripped.
Cover removed
Cover fasteners not tight
Replace cover
Tighten fasteners
snugly
Small volume of air discharged from unit
Clean according to Instructions
Extremely dirty electronic filter
(cell)
Plastic packing still on carbon after
filter
Remove plastic wrap
Unit not effectively cleaning the air
Clean according to Instructions
Electronic filter dirty
Electronic filter is not prop-erly
installed
Check reassemble instructions
Continuous “arcing” or snap-ping noise
Excessive accumulation of dirt on
the electronic filter
Clean according to Instructions
Electronic filter still damp
Allow filter cell to dry Com-pletely
Bent or damaged plate on
electronic filter. (cell)
Check and straighten
Odors more pronounced than usual
Discard and replace the carbon after filter
Open doors to the adjoining rooms
Service life of carbon after filter
expired
Air cleaner being used in a
confined space
If any of the problems are not solved to your satisfaction, please contact your Dealer or LakeAir
