8
GENERAL
The PHONE AMP G100 is a stereo headphone amplifier designed for
low-, medium- and high-Z loads (16 ... 600 ohms), as typical for most
high-quality headsets.
Due to its circuitry layout optimized in terms of noise/THD and specially
adapted to the head-phones mentioned above, the PHONE-AMP G100
fulfils highest quality demands.
Its features comprise:
-
Balanced inputs via XLR
-
Unbalanced inputs via Cinch
-
PRE-GAIN
= five selectable gain presets
- High-grade volume control for enhanced linearity
and lowest crosstalk
- Fully split amplifier design
- Two headphone sockets
- Delayed switched on/off headphone outputs by relay
Despite its compact dimensions, the PHONE-AMP G100 offers optimum
flexibility and highest output power. Reliability even under rough or
improper handling conditions has been another important goal of
development.
Thus, the unit is absolutely long-term short-circuit-proof.
In addition, the PHONE-AMP G100 is equipped with internal filters to
prevent overload by inaudibly high frequencies.
THE CASE
The case of the PHONE-AMP G100 are made of stainless steel while
front and rear panels are made from aluminum. Due to the rigged
materials used, the unit is well protected against mechanical damage.
EARTH AND GROUND
The Case of PHONE-AMP G100 is connected to earth potential. The
internal ground potential may be connected to earth by means of a
Summary of Contents for G100 Final Edition
Page 1: ...1 PHONE AMP G100 Final Edition USER s MANUAL ...
Page 14: ...14 ...
