https://www.lairdconnect.com/vela-if820-series
4
© Copyright 2023 Laird Connectivity. All Rights
Reserved
https://www.lairdconnect.com/contact
The development kit is designed to support performance validation and software development for projects utilizing our Vela
IF820 module. This document is intended to assist manufacturers and related parties with the integration of the Vela IF820 into
their host devices. Data in this document is drawn from several sources and includes information found in the Vela IF820
datasheet, Infineon CYW20820 datasheet, and FTDI FT232R datasheet.
IMPORTANT:
The information in this document is subject to change. Please visit the
information.
The purpose of this document is to provide details regarding the setup and configuration of the Vela IF820 mounted on the
development board. This document covers a description and design examples of the Vela IF820 DVK board and its features.
The following documents are available from the
▪
▪
Vela IF820 Datasheet
The product kit contains the following:
Development Board x1
The development board has the required Vela IF820 module already soldered onto it and
exposes all the various hardware interfaces available
Power supply
USB Cable
– Type A to MicroUSB. This cable is also used for the following:
▪
Bluetooth connectivity via the RP2040 on the DVK when the Vela IF820 is configured
for HCI UART interface
RF Antenna
Supplied with development kit part # 453-00172-K1 only. External antenna, 2 dBi, FlexPIFA
(Laird part #001-0022) with integral RF coaxial cable with 100 mm length and IPEX-4
compatible RF connector.
Jumper cap x 5
Five jumpers for 2.54 mm pitch headers used on Vela IF820 development board.
Fly leads x 6
Six fly leads for IO pin connection
Summary of Contents for Vela IF820
Page 1: ...Version 1 0...
