Sentrius RG1xx
User Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/ramp
15
© Copyright 2018 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
6
W
I
-F
I
C
ONNECTION
S
ETUP
By default, the gateway’s Wi
-Fi radio is not configured to connect to a Wi-Fi network. The user must access
the web interface on the gateway via the Ethernet interface to setup the Wi-Fi connection.
To setup a Wi-Fi connection, click the
Wi-Fi
tab in the main menu (
Figure 13
).
Figure 13: Wi-Fi connection setup
In the sidebar on the left, you can navigate to various Wi-Fi pages and see the status of the Wi-Fi interface.
There is also a button to enable/disable the Wi-Fi radio.
6.1
Use Scan to Add a Profile
To use the scan function to add a profile, follow these steps:
Connect to a Wi-Fi network
–
click
Scan
to scan for nearby Wi-Fi networks. Scanning continues until
you click
Stop
or click on one of the listed scan results (
Figure 14
).
Figure 14: Scan function
