Laird Sentrius RG191+LTE User Manual Download Page 9

Page: 9 / 56

http://www.lairdconnect.com

Americas

: +1-800-492-2320

Europe

: +44-1628-858-940

Hong Kong

: +852 2923 0610

To utilize the LTE functionality, a cellular provider

’s SIM card needs to be installed into the gateway. The recommended SIM

card to purchase shall support LTE-CAT 1, in order to utilize the full capabilities of the LTE gateway.

Note

: RG191+LTE production units come with a Truphone SIM card pre-installed. The SIM will need to be registered

and activated, see

5.2

To install the SIM card, follow these steps:

1. Unscrew the four (4) back Torx screws using a T8 Torx screwdriver for the non-IP67 gateway version.

Unscrew the thirteen (13) screws using a Philips screwdriver for the IP67 gateway version.

Figure 4: Gateway Screw Locations (Left: Standard; Right: IP67)

2. Carefully move the top enclosure lid to the back of the gateway for the indoor (non-IP67) version as seen

below. Remove the top lid for the IP67 gateway version (RF cables are not connected to the top cover on the
IP67 gateway).

Figure 5: Opened Gateway (indoor (non-IP67) gateway shown)

Note

: The RF cables are connected to the modules and glued in position. If the antennas are installed, remove

the antennas before moving the top enclosure in position for the indoor (non-IP67) gateway.

Summary of Contents for Sentrius RG191+LTE

























































Search results

Summary of Contents for Sentrius RG191+LTE

Reviews:

Brands by name

Popular brands

Laird Sentrius RG191+LTE, User Manual

Search results

Summary of Contents for Sentrius RG191+LTE

Reviews:

Brands by name

Popular brands