800-898-0759 • 845-339-9555 • 2000 Sterling Road • Mount Marion, NY 12456 • www.lairdtelemedia.com
- Page 15 -
LTM-CPDV
CapDiv
™
Portable
DV Disk Recorder
• There is no PAUSE mode condition with SYNC-TO-TAPE mode “OFF” select-
ed, so all video is recorded. The only way to “pause while recording” is to
press the PLAY/PAUSE button on CapDiv
™
during recording.
• A discrete video clip can only be created within an individual BIN. To record
a clip in another BIN the recording must first be stopped; the BIN number
changed; and the video recording process restarted.
• If SYNC-TO-TAPE mode “ON” is selected, CapDiv
™
can not record until the
camcorder tape is moving.
Automatic Record with SYNC-TO-TAPE Enabled
In Automatic Record CapDiv
™
emulates the camcorder recording method and
the SYNC-TO-TAPE mode “ON” is enabled, and recording to CapDiv
™
is
“slaved” or controlled by the RECORD button on the camcorder. In SYNC-TO-
TAPE mode “ON”, recording only occurs when the camcorder tape is moving.
Step 1: Hold the RECORD button and press the PLAY button at the same time.
This puts the CapDiv
™
into a RECORD-PAUSE mode. In the RECORD-PAUSE
mode, CapDiv
™
waits for the camcorder Time Code movement (vis-à-vis the
movement of the tape) to initiate the RECORD function. Step 2: Press the
RECORD button on the camcorder. (CapDiv
™
will begin to record simultane-
ously with the camcorder.) Step 3: When all recording sessions are completed,
press the STOP button on CapDiv
™
.
NOTES:
• If recording using the camcorder controls is temporarily halted, CapDiv
™
will
enter into PAUSE Mode and pause recording. Each time CapDiv
™
enters
PAUSE mode, a clip boundary is created, resulting in a new, sequential clip.
• When all recordings have ended, the STOP button on CapDiv
™
must be
pressed to end its recording session.
• A discrete video clip can only be created within an individual BIN. To record
a clip in another BIN the recording must first be stopped; the BIN number
changed; and the video recording process restarted.