800-898-0759 • 845-339-9555 • 2000 Sterling Road • Mount Marion, NY 12456 • www.lairdtelemedia.com
- Page 10 -
LTM-CPDV
CapDiv
™
Portable
DV Disk Recorder
This selection will convert all the clips in each BIN into a video format that can
be recognized by a computer. The process takes a short time and should be
done when all the video clips of interest have been acquired. Although the
process can be done repeatedly, converting video clips frequently provides no
benefit. The media conversion process does not prevent the clips from being
viewed at any time while CapDiv
™
is in the VTR mode.
SYNC-TO-TAPE Mode
is where recording in the CapDiv
™
is controlled by
the RECORD button on the camcorder. For recording to occur in the CapDiv
™
,
the camcorder’s tape must be moving. In this mode, the CapDiv
™
is in the
RECORD/PAUSE state as long as the tape in the camcorder is not moving.
Each time the RECORD button is depressed a new video clip is created with-
in a given BIN. The default recording mode for CapDiv
™
is with the SYNC-TO-
TAPE function ON. When the SYNC-TO-TAPE function is OFF, CapDiv
™
will start
recording as soon as the RECORD and PLAY buttons on the CapDiv
™
are
simultaneously pressed without regard to tape motion, and a new video clip
is created.
The User can choose whether to use the TimeCode from the Camcorder or
from the CapDiv
™
. When recording, TimeCode can either be “preserved” or
“reinserted”. The power-on default recording mode is PRESERVE TC “ON”;
where the TimeCode from the camcorder is “preserved” and recorded along
with the video content. When the recording mode is set to PRESERVE TC
“OFF”, the TimeCode is “reinserted” or over-written by the CapDiv
™
, starting
with 00:00:00:00. The first frame of the first clip in a BIN will have a
TimeCode value of 00:00:00:00 and each subsequent frame increments the
TimeCode throughout the BIN.
T
IME
C
ODE
C
ONTROL
S
YNC
-
TO
-T
APE
C
ONTROL
M
AKING
M
EDIA
F
ILES
