BT830 Hardware Integration Guide
Version 1.3
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
39
Laird Technologies
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
B
LUETOOTH
SIG
A
PPROVALS
Application Note: Subsystem Combinations
This application note covers the procedure for generating a new Declaration ID for a Subsystem combination on the
Bluetooth SIG website. In the instance of subsystems, a member can combine two or more subsystems to create a
complete Bluetooth End Product solution.
Subsystem listings referenced as an example:
Design Name
Owner
Declaration ID
Link to listing on the SIG website
BT830
Laird
D023115
https://www.bluetooth.org/tpg/QLI_viewQDL.cfm?qid=23115
Embedded CE 6.0
(Host Subsystem)
Microsoft
Corporation
B012893
https://www.bluetooth.org/tpg/QLI_viewQDL.cfm?qid=12893
Laird Customer Declaration ID Procedure
This procedure assumes that the member is simply combining two subsystems to create a new design, without any
modification to the existing, qualified subsystems. This is achieved by using the Listing interface on the Bluetooth SIG
website.
shows the basic subsystem combination of a controller and host subsystem. The Controller
provides the RF/BB/LM and HCI layers, with the Host providing L2CAP, SDP, GAP, RFCOMM/SPP and any other
specific protocols and profiles existing in the Host subsystem listing. The design may also include a Profile Subsystem.
The controller provides the RF/BB/LM and HCI layers, with the Host providing L2CAP, SDP, GAP, RFCOMM/SPP and
any other specific protocols and profiles existing in the Host subsystem listing. The design may also include a Profile
Subsystem.
Figure 24: Basic subsystem combination of a controller and host subsystem
The Qualification Process requires each company to registered as a member of the Bluetooth SIG –
The following link provides a link to the Bluetooth Registration page:
https://www.bluetooth.org/login/register/
D023115
