Laipac Technology Inc. StarFinder Lite User’s Manual & Reference Guide
© 2012-2021 by Laipac Technology Inc. All Rights Reserved. Page 30
4.4
Application Settings
Application
Speed & Mileage
Over Speed Alert:
In order to use this function, it must be enabled first. The Over Speed Alert,
formerly known as over-speed, is designed to send an alert if the unit moves
faster then the specified speed limit value.
Speed Limit:
The speed limit is user defined and can be set in kilometers or miles per
hour. If the unit travels faster than this value, an Over Speed Alert will be
sent to the GPRS server.
Mileage Accumulator:
This function must be enabled before it can be used. Unit is able to
accumulate distance based on a user defined “Mileage Starting Value” and
the unit of distance during unit moves. Whenever moving distance is
increased by 1(km/mile), the incremented value will be added to the
Accumulator
’s current mileage value.
Starting Value:
The Mileage Start Value is user defined and is recommended to match the
odometer reading in the equipped vehicle. From there you can specify the
unit of distance being kilometers or miles and the mileage value will
accumulate from there.
Mileage Alert:
This alert must be enabled before it can be used. This alert will be sent to
the remote server whenever another new Mileage Delta value is reached
during vehicle running. It is used to generate a warning for vehicle
maintenance warning or oil change, etc is coming due. For example, if
Mileage Start Value is 1000km and
Mileage Delta Value is 5000km, unit will
generate
Mileage Alerts when
Mileage Accumulator has its reading at 6000 km,
11000 km, 16000km, etc
