Laipac Technology Inc. StarFinder Lite User’s Manual & Reference Guide
© 2012-2021 by Laipac Technology Inc. All Rights Reserved. Page 31
Mileage Delta Value:
This value is a user defined distance value. It is designed to provide a
warning related to the next vehicle maintenance or oil change job is due.
The unit of distance must be the same as the ‘Mileage Starting Value’. The
default setting for this value is 1000 km
Application
Park & Accident
Towing Alert:
The Towing Alert must be enabled before it can be used. This feature
requests ‘Input 1’to be enabled as “ignition”. When vehicle with the unit
shuts down its engine, if unit experiences a movement that generates 2G or
greater force, the unit will send an alert to the remote server. This may be in
a situation where someone tows a vehicle without consent.
Trigger Value:
The G Sensor Trigger Value has a default value of 2Gs and should be kept
at a low recommended value to sense movement.
Accident Alert:
The accident alert requires enabling before it is used. It is designed to sense
a high impact hit and send an alert upon receiving it similar to that of a
vehicle collision. In order to have this alert working properly, ‘Input 1’ must
be enabled as “ignition”, also, user should provide requested “ignition
on/off” signal on Input 1. See section
4.3 I/O – Note.
Trigger Value:
The G Sensor Trigger Value has a default value of 5Gs and should be kept
as a recommended value to sense a vehicle collision as opposed to a pot hole
