- 64 -
SPECIAL PROGRAMMES
22.1
•
ACTIVATING MANUAL CLEANING CYCLE
Press the MENU button
13
,
turn knob
16
until
“Wash” is displayed and confirm by pressing
knob
16
.
Select “Manual” and confirm by pressing knob
16
.
The display reads “Cool” if the chamber
temperature is too high, “Wait” if the chamber
temperature is too low. When the temperature
is reached, the message “Insert detergent” will
appear, an acoustic signal will notify that it is
time to open the door and spray the detergent
into the cooking chamber.
Close the door and to reactivate the cleaning
cycle. From this moment on, no action is
required by the operator until the programme
has been completed.
If consistent dirt residue is deposited on the
drainage filter located at the centre of the
cooking chamber base, clean in order to
guarantee the free flow of water and detergent.
If the programme ends correctly, a message
is displayed on display
15
and by a repetitive
acoustic signal,
press button
14
to exit the
programme.
Turn the oven off using knob 16.
Carefully rinse the inside of the cooking
chamber, using the shower head,
pass a
sponge or cloth over the front gasket of
the cooking chamber to protect it against
premature deterioration.
24
•
MANUAL CLEANING
SPECIAL PROGRAMMES
22
•
MANUAL CLEANING
90037450rev00
