8
90035620rev01
GENERAL WARNINGS
• If technical support is required, then all the information on
the data plate must be provided, together with
detailed
information about the defect
, so that the support service
can understand the problem.
• The power supply to the oven must have a circuit-breaker
master switch with a minimum opening distance between
the contacts of at least 3 mm per pole.
• The oven must be included in an equipotential system. This
connection is carried out by attaching a wire with a nominal
section up to 10 mm
2
to the relevant terminal, located on the
rear of the oven and marked with the international symbol
IEC60417 – 5021�
The connection is made between all the adjacent appliances
located in the room and the earthing system for the building.
• This manual is also available in electronic format.
Contact your support service.
