Copyright ©
2021
Laia · www.laiatech.com
- 15
All rights reserved
4. Network Connection
4.1. Network Connection
Direct connection: Connect the camera and computer by network connecting cable.
Internet connection mode: Connect the camera to Internet by Router or Switch and user can log in the
device by browser.
Note: Please do not put the power and network cable in places where can be easily touched to prevent
video quality lowered by unstable signal transmission due to poor contact of cables.
The computer must have the network segment where the camera IP address belongs to. The device will
not be accessible if without the segment. I.E. The camera default IP address is 192.168.5.163, then segment
5 must be added in the computer. Specific steps are as below:
Firstly, open the window of Local Area Connection Properties on computer, select the
“
Internet
protocol version 4(TCP/IPv4)
”
as shown by picture. Double click or click the property
“
Internet
”
protocol
version 4 (TCP/IPv4) to enter into the Internet Protocol Version 4(TCP/IPv4) Properties window, select
“
Advanced
”
to enter into the Advanced TCP/IP Setting and add IP and subnet mask (192.168.5.26 /
255.255.255.0) in the IP browser as picture shown below. Click the
“
Confirm
”
to finish the adding of IP
segment. User can add the corresponding network segment according to the revised IP address of the
camera.
