Copyright ©
2021
Laia · www.laiatech.com
- 11
All rights reserved
3.2
Keys Instruction
After the product starts normally, it receives the infrared command and executes it. Press the key of the
remote control. The remote control receives the green flashing of the indicator lamp. Release the key and
stop the flashing of the indicator lamp. Infrared remote control can be used for preset setting, positioning,
horizontal, pitch rotation and other operations
.
1)
The key-press mode mentioned in this manual refers to the two actions of pressing and relaxing the keys
on the remote controller. For example, "press the [HOME] key" refers to the action of pressing the [HOME]
key and then relaxing. If it takes a long time to press the key, it will be specified in the manual.
2)
When the combination keys need to be operated according to the instructions, they are operated in the
order of the instructions. For example, "press the [*]+ [#]+ [F1] key" means first press the [*] key, then press
[#], and finally press the [F1] key.
1.
Address selection
Select the camera address to control.
2.
Standby Key
After 3S long press, the camera will step into standby mode. Long press 3S again, the camera will
self-test again and back to HOME position. (Note: If power-on mode is turned on and Preset 0 is set, and
there is no operation within 12s, it will automatically point to the specified preset position
3.
Focus Control Key
4.
Zoom Control Key
【
Auto Focus
】：
Enter into auto focus mode.
【
Manual Focus
】：
Enter into manual mode
；
【
Focus
＋】：
focal length
（
Effective only in manual focusing
mode
）
【
Focus
－】：
Focal distance
（
Effective only in manual
focusing mode
）
If these two keys are pressed for a long time, they will
continue to pull closer/farther and stop when they are
released.
【
zoom
＋】：
Close the picture and increase the lens
multiples
【
zoom
－】：
Scene widening and lens multiples narrowing
If these two keys are pressed for a long time, they will
continue to pull closer/farther and stop when they are
