Operator's Manual –
Timebuster
©
LAI GAMES
Page 23
ERRORS AND TROUBLESHOOTING
If the microprocessor detects any problems with the operation of the game, an
Error will be displayed on the 4-digit LED display and the machine will play a
voice message. “Please Call Attendant”. Some error Messages will only be
displayed when test mode is entered. Errors are displayed on the LED display as
, where ‘X’ is the error number.
There are nine error messages listed as follows:
CODE ERROR
DESCRIPTION SOLUTION
Err1
TICKET or CAPSULE DISPENSER ERROR
Jammed tickets, no tickets / capsules or no ticket
/ capsule notch pulse for longer than 3 seconds.
NOTE:
If
Err1
occurs and no ticket/ capsule
dispenser is fitted make sure
P13
&
P14
is set to
[ 0 ].
Clear ticket jam or replenish
tickets / capsules. After this,
push Test button once to clear
error.
NOTE:
The ticket / capsules
dispenser is an optional extra
.
Err2
COIN ERROR
Coin switch stuck
ON
for longer than 1 second.
Clear coin switch jam, possibly
customer strimming coin mechs.
If fault is cleared, MCU will
automatically clear error after 30
seconds.
Err3
EEPROM ERROR
Problem with on-board EEPROM.
Send MCU PCB to the closest
LAI Games distributor for repair.
Err4
PRIZE ARM EMPTY or PRIZE SENSOR
NOT WORKING
Refill Prize Arms or test sensor
using switch test.
Err5
PRIZE SENSOR BLOCKED or PRIZE
SENSOR FAULTY
Clear Blockage from between
prize sensors or test sensor using
switch test.
Err6
AUTOMATIC SOFTWARE
can not make
jackpot prize wins harder.
Reduce P11 setting and value of
jackpot prizes to compensate.
Err7
AUTOMATIC SOFTWARE
can not make
jackpot prize wins easier.
Increase P11 setting and value of
jackpot prizes to compensate.
Err8
AUTOMATIC SOFTWARE
can not make
consolation prize wins harder.
Try reducing P12 setting and
value of consolation prizes or
reduce P06, consolation prize
range
Err9
AUTOMATIC SOFTWARE
can not make
consolation prize wins easier.
Try increasing P12 setting and
value of consolation prizes or
increase P06, consolation prize
range
E r X
r
* NOTE:
Errors
Err6
to
Err9
only occur when P10 is set to
AUTOMATIC
.
Summary of Contents for Timebuster
