LAI Games Timebuster, Operator'S Manual

Page: 18 / 47

Operator's Manual – Timebuster
©
LAI GAMES
Page 13
PROGRAMMABLE ADJUSTMENTS MODE
GAME ADJUSTMENTS
♦
The game has thirteen programmable adjustments that can be changed in this
mode. They are P1 to P13 and their codes and values are displayed
alternatively during the adjustment procedure.
Example
: displayed adjustment alternates with its value .
Refer to the diagram below:
♦
There is a range of values for each variable of the game, and any value in this
range can be chosen for the game settings, using the change procedure.
ADJUSTMENT PROCEDURE
„ ENTER
The Programmable Adjustments mode is entered from Switch test
button. by pressing the Test button once, or from Attract mode by pressing
the Test button 4 times. This will prompt the code on the
display indicating the program mode.
„ SELECT
The Service button is pressed to step through each of the adjustment
configurati configurations, starting from the display, P01 being the
first step, continuing through to P13, and then looping again from
P01 to P13 until the mode is exited.
„ CHANGE
The Start/Stop button is pressed to change the displayed value. The
value can
ONLY
be stepped up by using the Start/Stop button, but
the value will loop back to its min value the next step after its max
value.
„ EXIT
The Programmable Adjustments mode is exited into Audits mode, by
button. pressing the Test button once.
* NOTE:
Certain program adjustments have a fast adjustment feature. By
holding the Start/Stop button down, the values step through
quicker.
1 0 P 0 1
P P P P
P 0 1
Press
SERVICE
NUMBER OF COINS MECH 1
1, 2, 3, ..., 10
to
change
value
Press
START
P 1 0
0 1
TEST MODE
Press
TEST
P P P P