31
MAINS VOLTAGE ADJUSTMENTS
TRANSFORMER CONNECTOR
!"
Locate the 2 machine transformers, both positioned to the right hand side of the
overhead display as viewed from the rear. If unsure of the location of either
transformer, refer to Parts location diagram on page 27 of this manual.
!"
Change the position of the ‘ACTIVE’ or ‘HOT WIRE’ input, (marked brown on
the diagram), to the position for the desired mains voltage. (See Diagram Below)
6 WAY CONNECTOR
PIN FUNCTION
1 240VAC
2 220VAC
3 110VAC
4 N/C
5 EARTH
6 0VAV
(NUTRAL)
