background image

 25 

AUDITS

 

MODE 

 

!"

By using the Audits Mode the operator can view statistics regarding the 

OVERHEAD JACKPOT DISPLAY

. This enables the operator to make calculated 

adjustments and “Fine Tune” the machine to maximize earning potential. 

 
 
 
 
 

!"

The Audits mode allows bookkeeping of the games processed since the last game 
audits reset. While in this mode, the game audits can also be reset to zero. 

 

!"

ENTER 

The Audits mode is entered from Programmable Adjustments mode by 

pressing

   pressing the Test button once. This will prompt the                    code on 

 

 

the display, indicating the Audits mode. 

 

!"

SELECT 

The Service / Enter button is pressed  for advancing each step   through 

 

 

the  set  of  audits  configurations,  starting  from  the                  display 

 

 

with A1 and ending with A6, and  then  looping  again  from A1 to A6  

 

 

until the mode is exited.

 

 

!"

RESET 

Audits A01 – A03  can   be   reset   during   any   of   the   ‘SIX’   audit 

 

 

configurations, by holding the Stop button for longer than 5 seconds. 

 

 

 

 

 

 

 

 

The display will be cleared while still holding the button pressed and 

will return

  will return to the same audit step after releasing the button.  The value 

value of

   of these  audits will be reset to “000”. 

 

!"

EXIT  

The Audits mode is exited into Display mode, by pressing the Test 

button.

   

button once.

 

 

 
 

GAME AUDITS 

QUICK REFERENCE TABLE 

 

DISPLAY CODE  GAME 

AUDITS 

 

A01 

Total Jackpot Wins 

 A02 

Highest Jackpot Winning Score 

 A03 

Highest Jackpot Tickets Won 

 

A04 

Last Jackpot Winning Score 

 

A05 

Last Jackpot Tickets Won 

 A06 

No. of Games since Last 

Jackpot 

* NOTE:         

Each individual game also has its own Audits information. For

more details on individual game Audits, please refer to the 

“Slam ‘n’ Jam”

game manual. 

A  A A 

A  A A 

 

 

 

 

 

 

Summary of Contents for Slam 'n' Jam Overhead Display












































Reviews: