17
ADJUSTMENT PROCEDURE
!"
The adjustments are made using the ‘Test Switch Box’ that is connected to the
Overhead Jackpot Display via cable.
TEST SWITCH BOX
!"
ENTER
The Programmable Adjustments mode is entered from Switch test
button.
by pressing the Test button once. This will prompt the code
on the display indicating the program mode.
!"
SELECT
The Service / Enter button is pressed to step through each of the
adjustment configurations, starting from the display, P01
being the first step, continuing through to P27, and then looping again
from P01 to P27 until the mode is exited.
!"
CHANGE
The Start / Step button is pressed to change the displayed value. The
value can
ONLY
be stepped up by using the Start / Step button,
but
the value will loop back to its min value the next step after its max
value.
!"
EXIT
The Programmable Adjustments mode is exited into Audits mode, by
button.
pressing the Test button once.
* NOTE:
Certain program adjustments have a fast adjustment feature. By
holding the Start / Step button down, the values step through
quicker.
P P P
P
P 0
1
SERVICE
ENTER
START
STEP
TEST
