5HP Dust Collector Manual
13
IN ALL CASES, MAKE CERTAIN THE RECEPTACLE IN QUESTION IS PROPERLY GROUNDED.
IF YOU ARE NOT SURE, HAVE A QUALIFIED ELECTRICIAN CHECK THE RECEPTACLE.
220 VOLT Single-Phase Operation
The motor supplied with your machine is a 220 volt motor. Power cord and plug is
not
included.
The recommended maximum cord length is 20’ of 10 AWG wire. Extension
cords are not recommended.
FUNCTIONS
Figure 4: High Frequency Remote Control Receiver and Manual Switch
HEPA Canister Filter detection
–
will illuminate when filter cleans (automatic cleaning/override).
ON/OFF Switch
–
turns collector
ON
or
OFF
.
Override
–
Press for (3) seconds to activate override cleaning while the cyclone is ON. You can also
activate this function by pressing the CLEAN button on the remote control for (3) seconds.
Receiver SET button
–
Used to program receiver.
ON/OFF Illuminate drum
–
controls the LED light on the drum lid to illuminate inside the drum for
visuals of the dust level.
ON/OFF Switch
Canister Filter detection
Receiver SET button
Override
ON/OFF button to
illuminate drum
