laguna P Flux 1, Manual

Page: 38 / 56

1.5HP Mobile Dust Cyclone Manual
37
Step Forty Four: Take the one of the cover plates, (2)
1/4”*1/2” carriage bolts, (2)
1/4”*OD19*2t flat washers and (2) 1/4” hex nuts and secure the cover plate to the
opening on the top of the drum. For the bottom holes do the same, but first use
foam tape to cover the square opening before bolting on the cover plate.
Step Forty Five:
Remove the flex hose and clamps from the cyclone cone in step
forty one. Locate the plug provided inside the hardware box and attach over the
vacuum suction tube as shown in the picture on the right below.
Cover plates
Cyclone Cone vacuum suction tube Drum lid vacuum suction tube