1.5HP Mobile Dust Cyclone Manual
35
Step Forty: Apply foam tape to the hole on the dust chute before securing the
pressure switch using (4) M4*12MM sheet metal thread bolts.
Step Forty One: Locate the Ø1-1/4”*230mm black flex hose and two Ø1-1/4”
hose clamps in the hardware box. Connect the one end of the flex hose to the
vacuum suction tube which is located on the top end of the cyclone cone.
Connect the other end of the flex hose to the octagon drum lid vacuum tube
which is located on the back end of the drum lid closest to the canister filter.
Secure both ends with the hose clamps provided.
Cyclone Cone vacuum suction tube
Drum lid vacuum suction tube
Summary of Contents for P Flux 1
