3
20
” PLANER
Thank you for choosing this planer.
This unit is carefully tested and inspected before
shipment and if properly used and maintained, will
provide you with 1 year of reliable service. To
ensure optimum performance and trouble
free operation a reasonable amount of care and
attention is required.
To get the most from your new planer, please take
the time to read this manual before assembling,
installing and operating the unit.
UNPACKING AND CLEANING
To ensure maximum performance from your 20"
planer, clean it properly; and install it accurately
before use. As soon as you receive the planer, we
recommend you follow these procedures:
1. Finish removing the contents of the shipping
carton and compare with the contents list.
2. Report damage, if any to your local distributor.
3. Clean all rust protected surfaces with a mild
solvent or kerosene. Do not use lacquer thinner;
paint thinner, or gasoline. These will damage
painted surfaces.
4. To prevent rust, apply a light coating of paste
wax to surface.
CARRIAGE
The planer has four lifting handles (A), pulled
them l out when needed, or pushed in when not in
use. (Fig.1)
USING A SLING
When using a sling to carry machine, lifting
handles must be pulled out (Fig.2). Try keeping
sling parallel to machine and hold steady.
ASSEMBLING
The base part of your planer can be fixed in place
with dimensional screws of 10 mm. (Fig.3)
SWITCH MAGNETIC
CONTACTOR CURCUIT FIG.3
- Single phase motor
- Power source: A,C in put
- Motor source : A,C, out put
- Grounding: D
Fig. 1
Fig. 2
Fig. 3
