11
ADJUSTING INFEED AND
OUTFEED ROLLER
Before starting with the
adjustment, you must check
the position of the cutting head.
You will need;
1. Thickness gauge 0.5m/m
2. Home made gauge block
- First turn the wheel handle to
make table upward.
- Use hand to turn cutting head left
and right, to make blade contact
with the gauge block.
- Do not move the table or make
any adjustments. (Fig. 31)
CHECKING INFEED ROLLER
Place gauge block under the cutterhead,
there must be a thickness gauge of 0.1m/m to get
the correct position. (Fig. 32)
Adjustments:
1. Place gauge block under the infeed roller
(Fig. 33).
2. Loosen nut no. 2, turn screw no. 1, this will make
the infeed roller move upwards, or downwards.
3. Make infeed roller touch the top of gauge block.
4. Once adjusted, turn the nut tightly (2), and
replace screw (1).
5. The same procedures apply for the other end.
Fig. 31
Fig. 32
Fig. 33
