laguna Fusion 3, Owner'S Manual

Page: 41 / 81

Fusion 3 Table Saw \ Setup \ Accessory Installation
© 2020 Laguna Tools 41
Accessory Installation
The Fusion F3
table saw’s supports several
accessories which help the machine to run smoothly and function properly. The
accessories which come with your table saw are: a dust collector hose, a set of fence hooks, and a tool caddy (located
underneath the table).
Quick Reference Guide
Add. Required Tools:

None
Troubleshooting/Tips:
The writhing knife can be found already attached to the blade
upon arrival. Be sure the machine is off, when you attempt to
remove the writing knife from its position on the back of the
blade.
Parts
REF Description Q Installation
Blade Guard Assembly 1 Boxed Individually
Dust Collection Hose 1 Blade-guard to Inlet
You will also need all the contents in the packages of:
Band clamp with hex bolt, flat washer, and hex nut. Fence hooks and hex bolts with flat washers.
Attaching the Dust Collector Hose:
1. Attach a band clamp on the mouth of the dust collector hose.
2. Attach the hose to the dust port on the blade guard.
3. Tighten the band clamp to secure the hose to the blade guard.
4. Repeat steps one through three to attach the hose to the table
saw’s 4”
dust outlet.