laguna CEF236230175, Setup And Maintenance Manual

Page: 8 / 45

Fusion Tablesaw
8
General Safety
warning:
Read all safety considerations. Failure to follow this set of guidelines can result in unwarranted damage to the machine and serious injury to
the operator and bystanders. Save all warnings and instructions for future reference.
Intended Use
Table saw and the workpiece guide equipment supplied with it are intended to be used exclusively for the following purposes:
● Laminated and unlaminated board materials (e.g. chipboard, coreboard, MDF board, ...)
● Solid wood
● Gypsum plasterboard, Cardboard, Veneer with a suitable clamping device
●Dimensionally stable plastics (thermoset plastics, thermoplastics).Sawing these materials does not normally involve any risks in respect of dust, chips, and thermal
degradation products.
Tools
:
● The chosen saw blade must be suitable both for the specific work cycle and for the specific material.
● Only circular blades which are solid chrome vanadium (CV) or tungsten carbide tipped (TCT) and have a diameter of 250mm , arbor size 30mm,as well as a
maximum width of 20mm are allowed for the main saw
。
● Saw blades made of high-alloy high-speed steel (HSS) are not allowed to be used.
● Saw blades and their fixing devices shall conform to EN 847-1:2013
。
Site of installation/use:
● The machine is not suitable for use outdoors, or in rooms that are subject to moisture or the risk of explosions.
● The intended use of the machine involves connection to a suitably dimensioned extraction system .
● The intended ambient temperature used of the machine : + 10 °C to +35 °C
● The intended Altitude used of the machine : shall be at altitudes up to 1000m above mean sea level
● The intended Relative humidity used of the machine : not exceed 50% at 40°C
● Intended use also involves compliance with our specified operating, maintenance and repair conditions and the safety information contained in the operating
instructions.
● The table saw may only be used, set up and maintained by persons who are familiar with the machine and aware of the dangers.
●The pertinent accident prevention regulations as well as any other generally recognized technical safety and industrial medicine rules must be observed.
● Repair work must be carried out by our own customer service or by an organization that we have authorized. Only original spare parts are allowed to be used for
this. we will assume no warranty for any damage that is caused by using non-original spare parts.
warning:
The machine is prohibited to be used in a potentially explosive atmosphere!
Work area
 KEEP ALL CHILDREN AND UNTRAINED PERSONS AWAY FROM THE MACHINE.
Do not allow bystanders to touch the machine or power cord.
All people but the operator should be away from the work area.
 KEEP WORK AREA CLEAN AND WELL LIT.
A cluttered area can limit the range of motion needed by the machine and cause serious injury to the operator or damage to the machine.
 MAKE SURE THE WORK AREA IS CHILD-PROOF AND UNACCESABLE TO UNTRAINED PERSONS.
Use padlocks where possible and keep all machines unplugged when not in use.

DO NOT KEEP OR PLACE TOOLS IN OUTDOOR, DAMP, OR DANGEROUS ENVIRONMENTS.
Never operate the tool under wet or damp conditions; there is a serious risk of electrical shock. Exposing this product to those environments may result in
damage to the tool and operator injury. Do not use tool in the presence of flammable liquids or gasses.
 DO NOT OPERATE MACHINE IN EXPLOSIVE ATMOSPHERES, SUCH AS IN THE PRESENCE OF FLAMMABLE LIQUIDS, GASES OR DUST.
Machine create sparks which may ignite the dust or fumes.
Personal Safety
 STAY ALERT, WATCH WHAT YOU ARE DOING AND USE COMMON SENSE WHEN OPERATING A POWER TOOL. DO NOT USE A POWER TOOL WHILE
YOU ARE TIRED OR UNDER THE INFLUENCE OF DRUGS, ALCOHOL OR MEDICATION.
A moment of inattention while operating power tools may result in serious personal injury.

USE PERSONAL PROTECTIVE EQUIPMENT. ALWAYS WEAR EYE PROTECTION.
Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.

PREVENT UNINTENTIONAL STARTING. ENSURE THE SWITCH IS IN THE OFF-POSITION BEFORE CONNECTING TO POWER SOURCE AND/OR