Laguna Tools Smartshop Composite Fabricator 16, Manual, Page: 24 / 77

24
4.) Place the Water Pump into
the Pail.
5.) Place the black electrical cord
of the Water Pump into the slot
of the Pail, leading to an
Electrical Outlet.
6.) Fill the Pail with about ¾ full of
water (Distilled Water is
Recommended).
7.) Place the Water
Pump into the Pail and
seal the lid onto the
pale.
8.) Place pale underneath
the Work
Bench/Workstation or any
place that the Pale is not in
the way.
9.) Place the 110v
Electrical Plug of the
Water Pump into any 110
Volt Outlet for Operation.
Water Pump (Optional) Connecting the water pipes to the pump (If Ordered)-
Note : If water-cooled spindles are run without
cooling, they could be damaged and fail.
Note : You will need to provide a coolant tank
with a minimum capacity of 5 gallons. If the shop
temperature is high, the tank size will have to be
larger. If your shop is likely to be subject to
freezing temperatures, antifreeze must be added
to the cooling water.