Laguna Tools Revo 10x16 Mini, Manual

Page: 13 / 24

13
Tail stock
The tail stock can be moved to any position on
the bed of the lathe. To move the tail stock,
unlock the locking handle, slide the tail stock to
the required position and lock. The tail stock
spindle can be extended and retracted by rotating
the handle located at the back of the tail stock.
The spindle can be locked in position with the
screw on the side of the tail stock. Always lock
the spindle when operating the lathe.
Changing pulleys
Pulley clamp handle
Pulley adjustment handle
Cover transport locking
screw
Pulleys
Pulleys viewed from the
underside of lathe
Pulley speed range
The pulleys are accessed from the back of the lathe. There is a hinged door. The
door has a transport screw that keeps the door closed during transport. To open
the door, remove the screw and store in a safe place in case you need to
transport the lathe.
To select a different set of pulleys proceed as follows.
Spindle lock
Locking handle