Laguna Tools Revo 10x16 Mini, Manual

Page: 8 / 24

8
Back tool rest (optional)
The back tool rest can be
swiveled and adjusted to suit the
job being turned on the back
faceplate.
Variable speed control
The variable speed control is
located on the front of the lathe.
The associated electronics are
located in a black box at the rear
of the lathe.
Electrical system
A power cord with a 3-pin 110V
plug is provided.
What you will receive with the
lathe
Allen wrench Centers
Safety glasses Knock out rod
Back tool rest holder
Allen wrench Fixing screws and washers
Variable speed control
Back tool rest