STEP 4. AIR CIRCUIT CONNECTION
STEP 5. DUST HOOD CONNECTION
The air circuit connector is on the Filter/Regulator unit located on the
Connect your dust collection system to the machine 's dust hood
back side of sander. Connect your air supply to the 5/16" air source
(located on top) with a 4" diameter. Make sure the dust collector has
connector with a flexible hose. The working pressure of the machine can
sufficient capacity for the machine. See Figure 3
be adjusted from the pressure regulator. Set the pressure by lifting the
adjusment knob and rotate it clockwise to increase pressure, counter -
NOTICE:
clockwise to decrease pressure. When the correct pressure is set, push the
ALWAYS TURN ON THE DUST COLLECTOR BEFORE
knob down to lock it in place. See Figure 2 . The recommednde working
OPERATING THE SANDER.
pressure is 4-5 kg/cm²
Figure 3
Figure 2
5
Adjustment knob
Summary of Contents for MSANWB43X75-2RK-25-0197
