16
Running and adjusting the machine.
Changing the cutter blades.
Chip breaker Cutter head
Gib jacking screw
Disconnect the power from the machine. Never conduct any maintenance or
fitting of cutters with the power connected to the machine.
1.
Remove the cover and the dust hood.
2.
Loosen all the screws in the gibs. There are three gibs for each blade.
Gib
Blade
3.
The gibs clamp the cutter blade and have jack screws that force the gibs
vertically. The gib and slot in the cutter head are tapered, and the vertical movement
clamps the blade to the cutter head. When the machine is prepared for shipping, all
the parts are greased. This may cause the gib to stick in place. Cut a piece of wood
to the approximate shape shown above, loosen the gib jacking screws and give
each gib a sharp knock. This will force the gib down and break the joint between the
gib and the cutter head.
Summary of Contents for MPL1301-0130
