Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
977600-1V
13
REV012021
TABLE SWING ADJUSTMENT
1. To swing the table loosen the clamp release bolt and swing the table to the desired
position.
2. After table is in the correct position, tighten clamp release bolt securely.
Note: Never swing the table if any material or fixturing is on it. Only adjust when table is free
of loose articles.
FEED DEPTH ADJUSTMENT
1. Setting the feed depth adjustment is done by loosening the clamp bolt on the spindle
depth index sleeve.
2. Rotate to desired length, and securely tighten the clamp bolt.
Note: Never make this adjustment while machine is running.
